Bibliography of CCI Engineers
"Thermomechanical design of XLPE insulated HV and EHV cables
installed in duct and pipe systems." Zenger W, Gregory
B, Cigré, Paris August 2006.
'The development of an ultrasound quality monitoring
process for the manufacture of enhanced reliability HV and EHV XLPE
cables.', Galloway S, Gregory B, Lloyd S, Notman D, Smith
C. JICABLE, Paris, June 2003.
"Gas Insulated Transmission Lines (GIL)"
Sabot A, Schuette A, Chakir A, Coventry P, Donazzi F, Feldman D,
Gregory B, Hata H, Hopkins M, Meijer S, Rizzi G, Royle D, Vestner
M. JWG 23/21/33.15, Cigré Publication 218, February 2003.
"Accessories for HV Cables with Extruded Insulation"
Iwata Z, Gregory B, Amerphol U, Argaut P, Barber K, Bergqvist H,
Koibuchi S, Lamy J, Laurent M, Nyberg P, Parmigiani B, Vermuelen
M. WG 21.06, Cigré Publication 177, February 2001.
'Cable Technology and Applications in the 21st Century',
Gregory B, IEEE Power Engineering Review, Vol 20, No 9, Sept 2000.
‘Influence of Power Lines on Weak Current Lines’,
Gregory B, Mendez JM, Monteys J and Rosello F, Cigré 36 -202; Paris,
2000.
'Choices and Considerations for the Selection of Power
Cables in Tunnel Installations', Gregory B, IEE Seminar
on Cables in Tunnels, London, 2000.
‘EHV Cable Systems-a Balanced View’,
Gregory B, 2000 IEEE Power Engineering Society Winter Meeting, Singapore,
2000.
‘Cables into the 21st Century’, Gregory
B, 2000 IEEE Power Engineering Society Winter Meeting, Singapore,
2000.
‘Installation
of 220kV XLPE Cables in a Tunnel Installation whilst Minimising
Electromagnetic Induction in Communication Cables’,
Barris S, Gregory B, Mendez JM and Monteys J, Jicable ‘99
5th Int. Conf on Insulated Power Cables, Versailles, 1999.
‘Technological Advances in Reliable HV XLPE Foil
Laminate Cable Systems’, Ford AEW, Gregory B, King
SM and Svoma R, Jicable ‘99 5th Int. Conf on Insulated Power
Cables, Versailles. 1999.
‘The Design of Power Cables to Operate at High Electrical
Stress’, Demaria G, Gregory B, Griffiths CL, Hampton
RN and Mainwaring SP, Jicable ‘99 5th Int. Conf on Insulated
Power Cables, Versailles. 1999.
‘Cost Reductions in Power Cable Systems Using Lean
Cable Technology’, Bartlett AD, Daly JJ, Gregory
B and Phillips S, CIRED, 15th Int. Conf. and Exhib. on Electricity
Distribution; IEE , Nice, 1999.
‘220kV XLPE Cables in a Tunnel Installation: Minimising
Electromagnetic Induction in Communication Cables’;
Mendez JM, Barris S, Monteys J & Gregory B; First Mediterranean
Conference on Power Generation, Transmission and Distribution, IEE,
Cyprus, 1998.
‘Technological Advances in Reliable XLPE Systems’;
Galloway BA, Gregory B, Svoma R; First Mediterranean Conference
on Power Generation, Transmission and Distribution, IEE, Cyprus,
1998.
‘Development of High Stress HV & EHV XLPE Cable
Systems’; Attwood JR, Gregory, B, Dickinson M, Hampton
RN & Svoma, R; Cigré 21 -108; Paris, 1998.
‘Basic Principles of Accessory Design for XLPE Supertension
Cable’; Gregory B; Cigré Australian Panel 21 Cable
Seminar, Sydney. 1997.
‘Choice of Cable
Type for HV and EHV Application’; Gregory B;
Cigré Australian Panel 21 Cable Seminar, Sydney. 1997.
‘High Standards for Modern HV Power Cable System
Environments’; Bartlett AD, Attwood JR and Gregory
B; CIRED, 14th Int. Conf. and Exhib. on Electricity Distribution;
IEE Conf. Pub 438, Paper No. 3.5.1. Birmingham, 1997.
‘EHV Polypropylene Paper Laminate Cable’;
Gregory B; Cigré Australian Panel 21 Cable Seminar, Sydney, 1995.
‘Technical Evolution of Accessories for XLPE Cables
at 66kV to 500kV’, Gregory B, EPRI, XLPE Transmission
Cable Issues Workshop, New York, April 1995.
‘Basic Principles of
Accessory Design’; IEE Colloq on Supertension (66kV-500kV)
polymeric cables and their accessories; Gregory B; London, 1995.
‘Accessories for HV Extruded Cables, Part 1 Compendium
of Accessory Types and Part 2 Glossary of Component Names’,
Cigré Working Group 21.06, Iwata Z (Convenor), Gregory B (Secretary),
Amerpohl U, Argaut P, Barber K, Bergqvist H, Koibuchi S, Lamy JP,
Laurent M, Nyberg P, Parmigiani B, Vermeulen MR, Cigré Publication
89, 1995.
‘Pre-Fabricated Accessories for Extruded Polymeric
Cable at 66kV to 150kV’; Attwood JR, Gregory B, Lindsey
GP & Sutcliffe WJ; IEE, 3rd Int Conf on Power Cables & Accessories
10kV - 500kV, London, 1993.
‘Polymeric Insulated High Voltage Cables and Accessories
in London’s Distribution System: A Review of Design, Installation
and Performance’; Ford AEW, Mathews JR, Gregory B,
Williams G ; IEE, 3rd Int Conf on Power Cables & Accessories
10kV - 500kV, London, 1993.
‘The Choice of Cable Type for Application at EHV
System Voltage’; Gregory B, Jeffs MD & Vail J;
IEE, 3rd Int Conf on Power Cables & Accessories 10kV - 500kV,
London, 1993.
‘Environmental Compatibility of Supertension Cables’;
Endersby TM, Galloway SJ, Gregory B and Mohan NC; IEE, 3rd Int Conf
on Power Cables and Accessories 10kV-500kV, pp. 71-76, London, 1993.
‘Polypropylene Paper Laminate Oil Filled Cable and
Accessories for EHV Application’; Endersby TM, Gregory
B and Swingler SG; 3rd IEE Int Conf on Power Cables and Accessories
10kV-500kV, London, 1993.
‘The Application of Polypropylene Paper Laminate
Insulated Oil Filled Cable to EHV and HV Transmission’;
Endersby TM, Gregory B and Swingler SG; Cigré paper 21-307. Paris,
1992.
‘Self-Contained Oil Filled Cable Insulated with Polypropylene
Paper Laminate for EHV Transmission’; Gregory B,
Jeffs MD and Smee GJ; 9th CEPSI, 3-29. Hongkong, 1992.
‘Low Loss Self-Contained
Oil Filled Cables Insulated with PPL for UK 400kV Transmission
Circuits’; Endersby TM, Gregory B and Williams DE; IEE Conf
Publication 345, pp. 337-343. London, 1991.
‘A Range of Transition
Joints for 33kV to 132kV Polymeric Cables’; Attwood
J R, Gregory B and Svoma R; Jicable ‘91 3rd Int. Conf on Polymer
Insulated Power Cables, Paris. 1991
‘Improved Accessories for Supertension Cable';
Gregory B and Lindsey GP; Cigré paper No. 21-03. Paris, 1988.
‘66kV and 132kV XLPE Supertension Cable Systems’;
Gregory, B. and Nicholls, A.W.; 6th Conf. on Electric Power supply
Industry. Transmission and Distribution Systems and Equipment. Paper
No. 3.08. 1986.
‘Accessories for 66kV
and 132kV XLPE Cables’; Gregory B and Vail J; Second
Int Conf on Power Cables and Accessories 10kV - 180kV. IEE Publication
No. 270, pp. 248-256. London, 1986.
‘Design and Testing of 270kV DC Self-Contained, Oil-Filled
Cable for the Land Section of the UK-France Connection’,
Arkell CA, Gregory B, Hawkes JE; IEEE Trans, T&D, 302-6, 1984.
‘Design of Self-Contained Oil Filled Cables for
UHV DC Transmission’; Arkell CA and Gregory B; Cigré
paper 21-07. Paris, 1984.
‘Transient Voltage Limiter for Underground
DC Transmission Systems’ Boden MJ, Anderson BR,
Arkell CA, Gregory B; Symposium on Urban Application of HVDC Power
Transmission, Philadelphia, October 1983.
‘Electric Cables Handbook’:
Third Edition, Blackwell Science, 1997 Ch 35,’Transmission
Cable Accessories and Jointing for Pressure-Assisted and Polymeric
Cables’, Gregory B, ‘Ch33, ‘Polymeric Insulated
Cables for Transmission Voltages’, Attwood JR and Gregory
B.
Second Edition, BSP Professional Books, 1990, Ch38 ’Transmission
Cable Accessories and Jointing for Pressure-Assisted and Polymeric
Cables’, Gregory B,
First Edition, Granada, 1982, Ch37, ‘Transmission Cable Accessories
and Jointing’, Gregory B,
‘Supertension Cable
Terminations for Metalclad SF6 Insulated Substations’;
Arkell CA, Galloway SJ and Gregory B; 8th IEEE/PES Conf and Exposition
on Overhead and Underground Transmissions and Distribution. 1981.
‘Self-Contained Oil-Filled
Cables for High Power Circuits’; Arkell CA, Gregory
B and Smee GJ, IEEE Trans. PAS-97, March-April 1978.
|
